Fluke MT-8200-60-KIT Intellitone 200 LAN Toner and 200 probe
|Networking Accessory||Cable Testers|
Fluke MT-8200-60-KIT Intellitone 200 LAN Toner and 200 probe, Coax f connector Adapter, 2x RJ11 and 2x RJ45 patch cables, Test leads with alligator clips, 2x lanyards, Quick start guide, 2x 9-volt batteries
Get advanced vision for tracing and locating network cables more effectively at patch panels, switches, termination blocks, or hidden within bundles. Our new IntelliTone Pro 200 LAN Toner and Probe Kits finds the cables others can't.
The IntelliTone Pro 200 LAN Toner and Probe Series from Fluke Networks is the first network cable toner tracer and probe to offer digital and analog signaling all in one network toner and probe. That means its equipped with the most powerful cable tracing and location technologies for any work environment. Use digital mode to trace and locate data cabling safely and effectively on active networks. Use analog mode to isolate individual wire pairs, and trace voice, audio, and video cabling.
The IntelliTone Pro 200 LAN Toner and Probe Series from Fluke Networks gives you superior vision for tracing and locating cables hidden in floors, ceilings, walls, and in bundles. This network cable toner and probe's breakthrough digital technology makes it the first tool to tone and trace safely and effectively on active networks.
Digital network cable toner and probe traces and locates cables on active network.
IntelliTone digital toning technology:
Ends network cable location confusion, decisively rejects noise and false signals
Network cable tracer locates cables on active networks, even when terminated at a switch
Isolates cable and wiring within a bundle, despite cable bleed
Confirms cable location, verifies cable continuity, and detects cable faults (opens, shorts, and reversed pairs) in one step
Signal strength indicator LEDs so you can help identify one cable that is bundled with other cables
Probe has built-in pair tester to identify open, shorted and crossed pairs
SmartTone analog toning technology:
Isolates individual wire pairs precisely by changing tone when shorted
Effectively traces and locates voice, audio, and video cabling
Reject noise and false signals
Locate the correct cable bundle
Isolate a cable within the bundle, despite cable bleed
Tests for continuity
Identify and diagnose 10/100/1 Gb Ethernet link connectivity with NIC / hub indication
Identify individual wire pairs with new SmartTone analog tuning
Verification on twisted-pair installation with CableMap capability which identifies common cable miswire
Operating temperature 32 °F to 104 °F (0 °C to 40 °C)
Storage temperature -4 °F to +140°F (-20 °C to °C)
Operating relative humidity (% RH without condensation) 95 % (50 °F to 95 °F, 10 oC to 35 °C)
75 % (95 °F to 104 °F, 35 °C to 40 °C) Uncontrolled < 50 °F (< 10 °C)
Vibration Random, 2 g, 5 Hz-500 Hz
Shock 1 m drop test
Safety EN 61010-1, Category: None
Altitude 3000 m
EMC EN 61326-1, FCC Part 15 B
Battery type and life 9 V alkaline (NEDA 1604A or IEC 6LR61), 20 hours typical
Applications Copper cabling media including, 75 or 50 Ohm Coaxial cable, Two Conductor control, security, generic cabling. 10 Base-T or 10/100 Base-T datacom networks. UTP cable. Shielded Twisted Pair supported in Cablemap function of the IntelliTone 200.
Dimensions 5.54 in x 2.94 in x 1.25 in (14.1 cm x 7.5 cm x 3.2 cm)
Control Thumbwheel switch
Toner interface Main Mod8 port for tone generation on all 4 pairs of UTP / STP cabling. F Connector for coaxial cabling Banana Jack Plugs (2) - two conductor wiring
Toner frequency IntelliTone signal: encoded digital signal
Analog SmartTone signal: 500 - 1200Hz, 4 songs
Ouptut power 5 V p-p
Auto power down Turns off automatically after 2 1/2 hours of inactivity
Dimensions 8.73 in x 1.88 in x 1.26 in (22.2 cm x 4.8 cm x 3.2 cm)
Display (8) LED indicators, Sync LED indicator
Audio IntelliTone: Microprocessor controlled audio files
Analog: Detected toner signal
Control Thumbwheel switch, volume control wheel
Tone detection Detects IntelliTone digital signal for Locate, Isolate, and CableMap
Detects analog SmartTone signal (500-1200Hz) and other analog toners.
Toner interface Main Mod8 port for cablemap on all 4 pairs of UTP / STP cabling.
Auto power down Turns off automatically after 1 hour of inactivity