Seagate ZP2000CV3A001 Baracuda Q5 2Tb/2000Gb - nGff (M.2) 3D QLC SSD with NVMe PCIe (Gen3.0) x4 mode, type 2280 - 22x80x2.38mm (single sided), LDPC (Low Density Parity Check) ECC, burst performance read/write: 2400/1800 mb/sec, 531TBW
Overview:
Upgrade your system with the 2TB BarraCuda Q5 PCIe M.2 Internal SSD from Seagate, which delivers performance speds up to 50x faster than tradition hard drives. Designed with 3D QLC NAND technology, the BarraCuda Q5 has an M.2 2280 form factor and utilizes the PCIe 3.0 x4 / NVMe 1.3 interface for fast, reliable performance, with sequential read speeds of up to 2400 MB/s and sequential write speeds of up to 1800 MB/s.
Features:
Upgrade to cost-effective SSD speeds with next-gen 3D QLC NAND
Leverage NVMe SSD speeds that are up to 50× faster than traditional hard drives
Harness high sequential reads of up to MB/s and writes of up to 1800 MB/s for more responsive downloads, installs, and multitasking
Get easy installation and upgrades with a slim M.2 2280 NVMe form factor
Extend battery life with low active power requirements of up to 3.3W
Rely on a robust limited 3-year warranty and 1.8 million hour MTBF
Enjoy added peace of mind with a limited 1-year Rescue Data Recovery Services
Benefit from long-term durability with 531TB total bytes written (TBW)
Migrate and clone data from old drives with ease using free Seagate DiscWizard software tool
Monitor SSD performance, health, and firmware updates with free Seagate SeaTools SSD software tool
Specifications:
Storage
Drive Capacity 2.0 TB
Performance
Interface PCIe 3.0 x4
Sequential Read Speed 2400 MB/s (128 KB Files)
Sequential Write Speed 1800 MB/s (128 KB Files)
Physical
Drive Type SSD
Form Factor M.2 2280
HDD Specs
SMART Support Yes
TRIM Support Yes
Reliability / Data Integrity
Endurance (Total Bytes Written) 531 TB
Mean Time Between Failures (MTBF) 1.8 Million Hours
Electrical
Power Draw 3.3 W (Active)
25.00 mW (Idle)
1.6 mW (Standby)
Environmental
Operating Shock 1500 G / 0.5 ms
Operating Temperature 32 to 158°F / 0 to 70°C
Storage Temperature -40 to 185°F / -40 to 85°C
General
Certifications RoHS, as per Manufacturer
Dimensions (W x H x D) 0.9 x 0.08 x 3.1" / 22 x 2.15 x 80 mm
Weight 0.02 lb / 9 g
