Transcend's SSD452K features the SATA III 6Gb/s interface and state-of-the-art BiCS4 technology, which allows 96 layers of 3D NAND flash chips to be vertically stacked. Compared to BiCS3 NAND at 64 layers, this density breakthrough greatly improves storage efficiency. The SSD452K is built with DRAM cache for fast access, and is fully tested in-house to guarantee reliability in mission-critical applications, boasting an endurance rating of 3K Program/Erase cycles.
DDR3 DRAM Cache embedded
Endurance: 3K P/E cycles (Program/Erase cycles) guaranteed
Advanced Global Wear-Leveling and Block management for reliability
Advanced Garbage Collection
Built-in LDPC ECC (Error Correction Code) functionality
Enhanced S.M.A.R.T. function
Compliant with RoHS 2.0 standards
Supports Trim and NCQ command
Power-saving DevSleep (Device Sleep) mode (optional)
Specifications
Appearance
Dimensions (Max.) 100 mm x 69.85 mm x 6.8 mm (3.94" x 2.75" x 0.27")
Weight (Max.) 54 g (1.90 oz)
Form Factor
2.5"
Interface
Bus Interface
SATA III 6Gb/s
Storage
Flash Type
3D TLC NAND flash
Capacity
128 GB/
256 GB/
512 GB/
1 TB
Operating Environment
Operating Voltage
5V±5%
Operating Temperature 0°C (32°F) ~ 70°C (158°F)
Storage Temperature -40°C (-40°F) ~ 85°C (185°F)
Humidity 5% ~ 95%
Shock
1500 G, 0.5 ms, 3 axis
Vibration (Operating) 20 G (peak-to-peak), 5 Hz ~ 800 Hz (frequency)
Power
Power Consumption (Operation) 3.3 watt(s)
Power Consumption (Sleep) 0.5 watt(s)
Performance
Sequential Read/Write (ATTO, max.) Read: 560 MB/s
Write: 520 MB/s
Sequential Read/Write (CrystalDiskMark, max.) Read: 560 MB/s
Write: 520 MB/s
4K Random Read/Write (IOmeter, max.) Read: 95,000 IOPS
Write: 85,000 IOPS
Mean Time Between Failures (MTBF) 1,000,000 hour(s)
Terabytes Written (Max.) 1,760 TB
Drive Writes Per Day (DWPD) 1.61 (3 yrs)
Note
Speed may vary due to host hardware, software, usage, and storage capacity.
The workload used to rate DWPD may be different from your actual workload, which may vary due to host hardware, software, usage, and storage capacity.