Eaton 9SX 5000i Tower

Eaton 9SX 5000i Tower

Specifications:

General
Topology On-line double conversion with PFC (Power Factor Correction) system
Configuration Tower
Part Number 9SX5KI
Rating (VA/Watts) 5000/4500
Dimensions (H x W x D, mm) 575 x 244 x 542
Weight (kg) 65.5
Electrical Input
Connection Hardwired - see manual for terminal block layout
Input Voltage Range 176-276V without derating (up to 120-276V with derating)
Nominal Voltage 200/208/220/230/240V
Frequency 50/60 Hz autoselection
Frequency Range 40-70 Hz
Short Circuit Current 90 A
Electrical Output
Voltages 200/208/220/230/240V +/- 2%
Voltage THD < 3%
Outlets Hardwired - see manual for terminal block layout
Overload Capacity 102-110% : 120s, 110-125%: 60s, 125-150%: 10s, >150%: 500ms
Efficiency (Normal Mode) Up to 94% in Online mode, 98% in Hi-Efficiency mode
Output Frequency 50/60 Hz autoselect, frequency converter as standard
Load Crest Factor 3:1
Battery
Battery Management ABM and Temperature compensated charging method (user selectable), automatic battery test, deep discharge protection, automatic recognition of external battery units.
Extended Battery Capability EBM
Communications
User Interface Multilingual graphical LCD display
Communication Ports 1 USB port, 1 RS232 serial port (USB and RS232 ports cannot be used simultaneously), 4 dry contacts (DB9), 1 mini terminal block for remote On/Off and 1 for remote power Off
Communication Slot 1 slot for Network-M2, Network-MS, ModBus-MS or Relay-MS cards
Environmental & Standards
Audible Noise <45dB
Operating Temperature 0 to 40°C continuous
Safety markings IEC/EN 62040-1
EMC Markings IEC/EN 62040 -2, IEC/EN 62040-3 (Performance)
Approvals CE /CB report (TUV) / EAC / RCM / BIS / KCC