D-Link DAP-X2810 Wireless AX1800 Wi-Fi 6 802.3at PoE Access Point

D-Link DAP-X2810 Wireless AX1800 Wi-Fi 6 802.3at PoE Access Point, 2x2 concurrent Dual Band, Wi-Fi offers high transfer speeds 1800 Mbps, 802.11ax Wi-Fi 6 Wireless standard, 1200 Mbps 5 GHz Wireless speed, 574 Mbps 2.4 GHz Wireless speed, Embedded Omni-Directional antennas, 1x Gigabit Ethernet LAN, Power-over-Ethernet

Overview:

Nuclias Connect AX1800 Wi-Fi 6 Access Point DAP-X2810
The Wi-Fi 6 ready DAP-X2810 is on hand to provide unbeatable speeds, greatly increased capacity and interference-free coverage throughout businesses, paired with the easy management of Connect.

Indoor - Wall/Ceiling

Easy to manage with D-Links free software-based management solution, Nuclias Connect
Wi-Fi 6 ready: delivers greater network efficiency and lower latency, with nearly four times the capacity of previous Wi-Fi standards
MU-MIMO slices through congestion, reducing wait time for all users
Superior throughput with dual-band Wi-Fi offers high transfer speeds of up to 1800 Mbps
Coverage is shared more efficiently over more users with Airtime Fairness
Band Steering intelligently manages users, pushing them onto the higher radio frequency when possible
Support for Power of Ethernet 802.3at means less wires, for cleaner and easier deployment
Stay secure with the latest WPA3 Personal & Enterprise wireless encryption
Features:

Hails The End of Slow Business
The DAP-X2810 is empowered with next generation Wi-Fi 6. Enhanced MU-MIMO with even more uplink and downlink streams serves more devices simultaneously. OFDMA dramatically increases transmission efficiency and 1024-QAM packs even more data, bringing unadulterated speed increases of a searing 25%.

Wi-Fi 6 leverages all these features and more to create Wi-Fi with unparalleled performance.

Wi-Fi That Turbo Boosts Business Performance
With the DAP-X2810 by your side, its all systems go. It is fully prepared to handle all day-to-day demands of busy SMBs. Equipped with Wi-Fi 6, there are massive performance improvements, as well as all the features of 11ac now available for the 2.4 GHz band too.

Take a Load Off and Let Your AP do the Hard Work
The DAP-X2810s Load Balancing feature spreads the work load between two or more Access Points to get optimal resource utilization, throughput and response time, while Airtime Fairness helps distribute equal amounts of air time to each connected client. Band Steering auto-connects devices such as smart phones and tablets to the higher-capacity 5 GHz band while allowing devices 2.4 GHz-ready to remain. The result is a steady, consistent connection for each user - the perfect balancing act.

No-Wait Wi-Fi Even at Peak Time with MU-MIMO
Equipped with the latest 802.11ax MU-MIMO technology and 1800 Mbps throughput, delivering exceptional connectivity to more users and devices just got a lot easier. Your network will not balk, even at the busiest of times.

Multi-Mode Makes the Most of your Network Capabilities
In order to achieve optimal network performance, the DAP-X2810 has several operational modes tailored to best fit the individual needs of your network. Access Point, WDS (Wireless Distribution System), and WDS with Access Point modes allow for flexible, customizable deployment whatever your requirements.

Access Point Add wireless access to your existing wired network.
WDS
WDS with AP
Free Nuclias Connect Remote Centralized Management Software
D-Links Nuclias Connect is a centralized management and analytics solution that brings convenience, control, customizability and cost-effective scaling to SMB (small-medium-sized business) networks. It enables network monitoring, management, and device configuration through a single, easy-to-use software interface.

Whats more - its free to download and there are no licensing or support fees. Easily manage your network, anytime, anywhere.

Complete Control over your Networks Access
Complete control comes as standard with the DAP-X2810 . Combined with the Nuclias Connect Software, a variety of the latest in network security and management tools are at your fingertips. You can rest assured that the best of the best are hard at work keeping your network protected and hitch free.

Supports WPA3 The latest WiFi security for more protection
RADIUS Eliminate shared passwords with unique credentials for each employee
Customizable Captive Portal Separate guest and employee access
MAC Filtering - Limit what devices can connect
Rogue AP Detection - Guard against unauthorized Access Point installation
Wireless LAN Segmentation - Better bandwidth utilization
Wireless Isolation - Limit what users access on the local network
Wireless Broadcast Scheduling - Automate when your network is available
SSID Broadcast Disabling - Hide your wireless for an extra layer of security
The Beating Heart of Your Network
At the heart of your network is the DNH-100 Wireless Controller, or ' The Hub. It centralizes all aspects of your Access Points provisioning and management, allowing them to work together as a team. Features such as self-organizing, self-optimizing and self-healing keep the network performing at its peak.

Specifications:

Type Software Managed AP
Wireless standard 802.11ax Wi-Fi 6
Frequency band mode Dual-band simultaneous
Wireless speed 1200 Mbps 5 GHz
574 Mbps 2.4 GHz
Antenna type Embedded omni-directional antennas
Antenna gain 3.2 dBi for 2.4 GHz
4.3 dBI for 5 GHz
Power-over-Ethernet Yes
Wired interface 1 x Gigabit Ethernet LAN
Console port Yes
Indoor/outdoor Indoor
Type of housing Plastic
Wireless modes Access Point (AP)
WDS bridge
WDS with AP
Wireless client
Advanced features MU-MIMO
Roaming
SmartBeam
Maximum number of SSIDs 16
Auto channel selection Yes
WMM-PS/802.11e (U-APSD) Yes
Wi-Fi scheduler Yes
AP traffic load balance Yes
L2 roaming Yes
WEP 64/128 bit Yes
WPA/WPA2-Personal/Enterprise Yes
WPA3-Personal/Enterprise Yes
TKIP/AES encryption Yes
WPA_WPA2_PSK over WDS Yes
WLAN partition Yes
SSID broadcast disable Yes
Station isolation Yes
MAC address filtering Yes
802.1X authentication Yes
DHCP server Yes
IGMP snooping Yes
IPv6 Yes
Management platform Nuclias Connect
WEB Yes
SNMP (v1, v2c, v3) Yes
CLI Yes
Telnet Yes
SSH Yes
Syslog Yes