Splice Protectors 40mm HSFP-40T 1mm Pin

These heat shrinkable fibre optic splice protectors requires a temperature of 110 ? for 1 minute for shrinking and an additional 30 seconds for cooling down time before inserting the splice into a tray to allow the meltable adhesive to set. Splice Protectors 40mm HSFP-40T 1mm Pin.

Sold in packets of 100.

Specifications    

Operating Temperature: -45? to 125?

Tensile strength: >10.3 MPa

Elongation at break: > 500%

Longitudinal shrinkage: <5%

Eccentricity: < 30%

Dielectric strength: >25KV/mm

Volume resistance: > 1015Ω·cm

Copper stability: Non-Corrosive

Water absorption: < 0.10%