Ubiquiti PowerBeam 5AC Isolator Gen2 | PBE-5AC-ISO-Gen2

Ubiquiti's PowerBeam 5AC Isolator Gen 2 is an airMAX® CPE (Customer Premises Equipment) with dedicated Wi-Fi management.

Improved Noise Immunity

The PowerBeam 5AC Gen 2 directs RF energy in a tight beamwidth. With the focus in one direction, the PowerBeam 5AC Gen 2 blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency.

Integrated Design

Ubiquiti’s InnerFeed® technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses.

Specifications    

Antenna Gain: 25dBi

Beam-width: 12°

Data Rate: 867Mbps

Ethernet Ports: 1x 10/100/1000

Hardware Button: Reset

Interfaces: 1

Max. Power Consumption: 8.5W

Mounting: Pole-Mount

Operating System: airMAX ac

Operating Temperature: -40°C to 70°C

PoE Input: 24V Passive PoE

PoE Output: None

Power Input: 24V 0.5A Gigabit PoE Injector (Included)

Serial Interface: None

SIM Slots: None

Supported Voltage Range: 20V-26V

USB Ports: None

Dimensions: 459 x 459 x 261mm

Weight: 3.2kg