Netis P106GC 6 Port Gigabit PoE Switch

Netis P106GC 6 Port Gigabit PoE Switch, 4x Gigabit PoE Ports, 1x Gigabit Uplink RJ45 Port, 1x Gigabit SFP Port, 68W for All PoE Ports, 30W for each PoE Port

Overview:

4GE POE+1GE +1GE SFP Uplink POE Switch
Netis 4GE POE+1GE +1GE SFP Uplink POE Switch P106GC provides a great selection for expanding your home, store or office network. It fully complies with IEEE802.3/802.3u/802.3ab/802.3z Ethernet standards. It provides 4 Gigabit POE RJ45 Ports and 1 Gigabit uplink RJ45 port and 1 Gigabit SFP uplink port. All POE RJ45 ports support Power over Ethernet function and it can automatically detect and supply power with the IEEE 802.3at/af compliant Powered Devices (PDs). With the AI designed, P106GC will recover unresponsive POE devices automatically, QoS, VLAN will provide more smooth network and better using experience.

Features:

10* 10/100/1000Mbps Auto-Negotiation RJ45 ports,8 PoE function
Supports PoE power up to 30W for each PoE port,68W for all PoE ports
Supports PoE IEEE 802. 3at/af compliant Powered Device (PD)
IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode
20Gbps switching fabric capacity/backplane bandwidth
Supports 2K MAC address table, MAC address auto-learning & auto-aging
A utomatically detect and reboot unresponsive POE devices
SupportQoS, more smooth for video monitoring transmission
Support LAN ports isolation
Steel case, with external power supply

Specifications:

Hardware
Interface 4*10/100/1000M POE ports (Data /Power)
1*10/100/1000M uplink RJ45 port (Data)
1*10/100/1000M SFP port
Basic function Follow IEEE 802.3 Ethernet and IEEE802.3u Fast Ethernet Protocol
Supports POE IEEE 802. 3af/at compliant Powered Device (PD)
Store-and-forward switching scheme
Support IEEE802.3X full duplex and Backpressure half duplex
MAC address auto-learning & auto-aging
Standards IEEE 802.3 10BASE-T Ethernet
IEEE 802.3i 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
IEEE 802.3af/at, Power over Ethernet
IEEE 802.3x Flow Control
Mode Normal switch mode
Data Transfer Rate Ethernet : 10Mbps(Half-duplex), 20Mbps(Full-duplex)
Fast Ethernet :100Mbps(Half-duplex), 200Mbps(Full-duplex)
Gigabit Ethernet :2000Mbps(Full-duplex)
QoS Yes
VLAN Yes
Switching Capacity 12G
MAC Address Table Size 2K
Jumbo Frame 2048 byte
Environment Operation Temperature : 0°C~40°C
Storage Temperature : -40°C~70°C
Operation Humidity : 10%~90% RH Non-condensing
Storage Humidity : 5%~90% RH Non-condensing
Power Input POE Standards Single port maximum power 30W, whole switch maximum power 68W
Supporting over-current, over-voltage and short-circuit protection
Supporting Soft Start of High Power PD
Support sequential boot-up
Power Supply Pin:12+/36-
AC 110~240V 50/60HZ
Cabling type 1000Base-TX: Cat 5e or better UTP/STP(≤100m)
100Base-TX: Cat 5e or better UTP/STP(≤100m)
10Base-TX: Cat 5e or better UTP/STP(≤100m)
Dimensions (L x W x H ) 124mm*115mm*33mm