Ubiquiti Fibre to Ethernet Converter with PoE | F-POE-G2

Ubiquiti's POE-FIBRE, Optical Data Transport for Outdoor PoE Devices is a low-cost solution for outdoor deployments that require long-distance runs to reach the PoE device. Deployments with the FiberPoE also provide significant EMI and ESD protection over typical PoE installations. With the FiberPoE, data and power are transported on separate cables to greatly improve data integrity and enable much longer cable runs.

The FibrePoE only provides Gigabit bi-directional data transport (no auto negotiation) between twisted-pair Ethernet cable and fibre optic cable, and injects DC power to the Ethernet cable for passive PoE. Use one FiberPoE device as an Fibre?to?Ethernet Converter, or a pair of FiberPoE devices to create a Fibre Bridge.

NOTE: SFP Module & PoE Injector sold separately

Compatible PoE Injectors include POE-24G-24W, POE-50G-60W and POE-48G-15W

Specifications    

Ethernet Ports: 1x 10/100/1000

Max Power Consumption: 1.5W

Operating Temperature: -40°C to 60°C

PoE Input: 24V or 50V (Passive PoE)

PoE Output: 24V or 50V Passive PoE Pass-through

Power Input: 16V-57V (Injector not Included)

SFP Ports: 1x 1.25Gbps

Supported Voltage Range: 16V-57V

Other: 1x DC Terminal Block

Dimensions: 196.4 x 93.5 x 32.4mm